At the price of fuel today, it behooves the vehicle owner and operator to be knowledgable about the quality, performance and unfortunately the price of fueling today's transportation. It is important to know that the quality of fuel has actually decreased over the last twenty years. The fuel industry is now blending fuels specifically to have a short storage life. If any of you have tried to store gasoline &/or diesel for six months to a year, you have probably experienced the souring of the fuel. Most of us can remember when gasoline had lead as one of its properties. The purpose for the lead additive was to lubricate the upper cylinder and valve seal, valve guide of engines. It also enhanced the octane &/or cetane and it helped to prevent the pre-detination (pinging) problem which high performance, high compression engines often experienced. It was good environmentally to remove the lead from fuels. However, the fuel industry made a mistake in not adding anything back into the fuel to compensate for what the lead had accomplished. Most everyone I have talked to these days, even in high performance vehicles, are buying the cheaper unleaded fuel just because of the escalating cost.

Yes, your car will probably go from point A to point B on the fuels of the day, but your upper cylinder, valve seal, valve guide components are taking a beating and will be the first components of your engine to wear out, and those of you who live in areas where the vehicle has to pass an emission test could experience failures in as little as 20 to 30,000 miles due to the excessive valvue train wear.

There is a technology which is available to solve this fuel dilemma. This is accomplished with an additive which you can add yourself with each fill up which will give you the following benefits.

1. You can buy the cheapest grade of fuel, even in high performance vehicles which are recommended to burn premium grade fuel.

2. This additive will provide a superior lubrication enhancement to those areas of the engine we have been discussing, which have previously been starved for lubrication. In this additive also is a preventive maintenance cleaning package, which as you drive will help to keep your injectors &/or carburetor running clean and smooth.

3. This additive package, when blended to your store bought fuels activates an octane boost for gas fired engines and a cetane boost for diesel fired engines.

4. These many benefits equate to improved performance, and the long range money saving benefits of keeping your car on the road and out of the shop. By utilizing this fuel additive in tandem with our breakthrough oil additive, you can keep your vehicle running for several hundred thousand miles, you can save a literal fortune in repair bills. You save at the gas pump with every fill up, and you are beating the fuel and automobile industry at their own game.

The ratio of use for this Fuel Additive is one to two ounces per ten gallons of fuel. Especially in cold weather, two ounces will show increased benefits. This product comes in a dispensing bottle with an ounce measurement for convenience. You simply carry it with you in your trunk and add it each time you fill up.